Risotto, OD

Ground treatment: Prepare the working solution immediately before use. Prepare the stock solution in advance. Fill a separate container half full with water, add the required amount of the product for the stock solution concentration of 30–40% and mix for 1–2 minutes. Pour the resulting stock solution into the sprayer tank, filled three quarters full with water in advance. Flush the stock solution container with water several times and pour the water into the sprayer tank. Add water to the sprayer tank to the full volume and mix thoroughly. Prepare the working solution and refill the sprayer at designated places that are to be deactivated later. Use rod sprayers (Amazone, Lemken, Hardi, OPSh-15-01, OP-2000-2-01 or similar sprayers).

Aerial treatment: Prepare the working solution by mechanized method immediately before spraying. It is expedient to use stationary filling stations SZs-10 and mobile units APT "Temp" or APZh-12. To prepare the working liquid, ½ of the tank of the filling unit is filled with clean water, the stock solution of the product is added and the tank continues to be filled with water with simultaneous stirring. During the aircraft approach to the treated area the hydromixer is switched on for additional mixing of the working solution (the hydromixer operation time is not less than 2 minutes). Works on preparation of working liquid and filling it into the tank of AN-2 airplane sprayers are carried out with the engine switched off using ground filters for additional cleaning of the working liquid.